There are different types of temperature measurement. These include:

Thermistor – this is a type of semiconductor, meaning they have greater resistance than conducting materials, but lower resistance than insulating materials. There are small beads of semiconductor material (e.g. metal oxide) which are incorporated into a Wheatstone bridge circuit. As the temperature increases, the resistance of the bead decreases exponentially

Thermocouple – Two different metals make up a thermocouple. Generally, in the form of two wires twisted, welded, or crimped together. Temperature is sensed by measuring the voltage. A potential difference is created that is proportional to the temperature at the junction (Seebeck effect)

Platinum resistance thermometers (PTR) – uses platinum for determining the temperature. The principle used is that the resistance of platinum changes with the change of temperature. The thermometer measures the temperature over the range of 200°C to1200°C. Resistance in metals show a linear increase with temperature

Tympanic thermometers – uses infrared radiation which is emitted by all living beings. It analyses the intensity and wavelength and then transduces the heat energy into a measurable electrical output

Gauge/dial thermometers – Uses coils of different metals with different co-efficient of expansion. These either tighten or relax with changes in temperature, moving a lever on a calibrated dial.

The attributable risk is the rate of a disease in an exposed group to that of a group that has not been exposed to it. It involves the measure of association that is pertinent to making decisions for the individuals.

The most likely of the differential diagnosis in this case is a duodenal ulcer located on the posterior abdominal wall.

These can cause an erosion of the abdominal wall, eventually affecting the gastroduodenal artery and resulting in major bleeding and haematemesis.

Gastroduodenal artery supplies the pylorus, proximal part of the duodenum, and indirectly to the pancreatic head (via the anterior and posterior superior pancreaticoduodenal arteries)

Variance and standard deviation indicate the dispersion of the plot from mean value and thus are not really helpful in summarizing the mean.

Range is the difference between maximum and minimum value that is 45 in this case.

The mean in this case is 6.2 due to the presence of an outlier 45. In the presence of outlier mean can be misleading as it is quite sensitive to skewness in data.

Mode is the most frequent value. In this case mode has 4 values: 0,1,2,4.

In case of skewedness, median is the most apt representative of the mean as it is not affected by outliers. In this case since the data set has even values i.e. 10. Median is the average of the 5th & 6th entry after arranging the data in ascending order like that in case of the question (0,0,1,1,2,2,3,4,4,45). This turns out to be 2.

The posterior tibial nerve lies on the posterior surface of the tibialis posterior and, lower down the leg, on the posterior surface of the tibia. The nerve accompanies the posterior tibial artery and lies at first on its medial side, then crosses posterior to it, and finally lies on its lateral side. The nerve, with the artery, passes behind the medial malleolus, between the tendons of the flexor digitorum longus and the flexor hallucis longus.

It gives off muscular branches to the soleus, flexor digitorum longus, flexor hallucis longus, and tibialis posterior. A medial calcaneal branches off to supply the skin over the medial surface of the heel, and an articular nerve to supply the ankle joint. Finally, it terminates to become the medial and lateral plantar nerves.

The saphenous nerve is a branch of the femoral nerve that gives off branches that supply the skin on the posteromedial surface of the leg.

The sural nerve is a branch of the tibial nerve that supplies the skin on the lower part of the posterolateral surface of the leg.

The superficial peroneal nerve is one of the terminal branches of the common peroneal nerve. It arises in the substance of the peroneus longus muscle on the lateral side of the neck of the fibular. It ascends between the peroneus longus and brevis muscles, and in the lower part of the leg it becomes cutaneous. Muscular branches of the superficial peroneal nerve supply the peroneus longus and brevis muscles, while medial and lateral cutaneous branches are distributed to the skin on the lower part of the leg and dorsum of the foot. In addition, the cutaneous branches supply the dorsal surfaces of the skin of all the toes, except the adjacent sides of the first and second toes and the lateral side of the little toe.

The superficial peroneal, sural and saphenous nerves cannot be used to assess neuromuscular blocks since they are sensory nerves.

The deep peroneal nerve enters the dorsum of the foot by passing deep to the extensor retinacula on the lateral side of the dorsalis pedis artery. It divides into terminal, medial, and lateral branches. The medial branch supplies the skin of the adjacent sides of the big and second toes. The lateral branch supplies the extensor digitorum brevis muscle. Both terminal branches give articular branches to the joints of the foot. This nerve is too deep to use for neuromuscular blockade assessment

Drug elimination is the termination of drug action, and may involve metabolism into inactive state and excretion out of the body. Duration of drug action is determined by the dose administered and the rate of elimination following the last dose.

There are two types of elimination: first-order and zero-order elimination.

In first-order elimination, the rate of elimination is proportionate to the concentration; the concentration decreases exponentially over time. It observes the characteristic half-life elimination, where the concentration decreases by 50% for every half-life.

In zero-order elimination, the rate of elimination is constant regardless of concentration; the concentration decreases linearly over time. A constant amount of the drug being excreted over time, and it occurs when drugs have saturated their elimination mechanisms.

Since phenytoin is observed in elevated levels, the elimination mechanisms for it has been saturated and, thus, will have to undergo zero-order elimination.

The amount of oxygen carried by 100 ml of blood is called the arterial oxygen content (CaO2)and is normally 17-24 ml/dL and can be determined by this equation:

CaO2 = oxygen bound to haemoglobin + oxygen dissolved in plasma

CaO2 = (1.34 × Hgb × SaO2 × 0.01) + (0.003 × PaO2)

where:

1.34 = Huffner’s constant (D) – Huffner’s constant does not change and its magnitude relatively small.
Hgb is the haemoglobin level in g/dL and SaO2 is the percent oxyhaemoglobin saturation of arterial blood
PaO2 is (0.0225 = ml of O2 dissolved per 100 ml plasma per kPa, or 0.003 ml per mmHg).

Quantitatively, the amount of oxygen dissolved in plasma is 0.3 mL/dL.

Henry’s law states that at constant temperature, the amount of gas dissolved at equilibrium in a given quantity of a liquid is proportional to the pressure of the gas in contact with the liquid.

Given a haemoglobin concentration of 15 g/dL and a SaO2 of 100% and a PaO2 of 13.3 kPa, the amount of oxygen bound to haemoglobin is 20.4 mL/100mL.

Cardiac output is an important determinant of oxygen delivery but does not influence the oxygen content of blood.

When there is capillary leakage as seen in dependent oedema or ascites, oncotic pressure becomes a problem.

The intracellular sodium concentration is very sensitive to the extracellular sodium concentrations. When there is an imbalance, osmosis occurs resulting in shifts in water between the two compartments.

The microvascular endothelium relies upon osmosis and other processes as it is not freely permeable to water.

Nitroglycerine is rapidly denitrated enzymatically in the smooth muscle cell to release the free radical nitric oxide (NO).

Released NO activated cytosolic guanylyl cyclase which increases cGMP (cyclin guanosine monophosphate) which causes dephosphorylation of myosin light chain kinase (MLCK) through a cGMP-dependent protein kinase.

Reduced availability of phosphorylated (active) MLCK interferes with activation of myosin and in turn, it fails to interact with actin to cause contraction. Consequently, relaxation occurs.

The most likely diagnosis is a spinal epidural haematoma, a neurological emergency. A full examination must be carried out to determine the nature of the neurological problem before conducting any investigations or imaging.

The effects of spinal anaesthesia should have worn off by this time point, and the severe back pain is a red flag.

The patient will also require an urgent neurological team referral as a spinal epidural haematoma requires immediate evacuation for spinal decompression. Analgesics may be prescribed for pain management.

Heparin would have been fully metabolised and so a reversal is unnecessary.

A spinal epidural haematoma is a pooling of blood in the epidural space, which can cause compression of the spinal cord. Its presenting symptoms are:

Usually begins with severe backpain and percussion tenderness
Cauda equina syndrome
Paralysis of the lower extremities.
If infected, a fever occurs in 66% of cases
Lower limb weakness developing after stopping an epidural infusion or weakness of the lower limbs which does not resolve within four hours of cessation of infusion of epidural local anaesthetic
Meningism.