The relative risk (also known as risk ratio [RR]) is the ratio of risk of an event in one group (e.g., exposed group) versus the risk of the event in the other group (e.g., nonexposed group).

The odds ratio (OR) is the ratio of odds of an event in one group versus the odds of the event in the other group.

99.7% of the values within 3 standard deviations of the mean.

For 99.7% confidence interval, you can find the range as follows:

1. Multiply the standard error by 3.

2. Subtract the answer from mean value to get the lower limit.

3. Add the answer obtained in step 1 from the mean value to get the upper limit.

For a confidence interval of 68%, multiply the standard error with 1 and repeat the process. For a 95% confidence interval, Standard Error is multiplied by 1.96 to get the interval.

The question mentions a quantitative, ratio scale data set. The use of mean would be ideal under normal circumstances, however, in this situation median is preferred as it is less sensitive to the skewness of data. The median is usually preferred to other measures of central tendency when your data set is skewed (i.e., forms a skewed distribution)

Mean, also known as the average, is the most common measure of central tendency. It is the sum of all observed values divided by the number of observation. It is not useful for skewed data, which has an abnormal distribution. It is useful, instead, for numerical data that have symmetric distribution. It reflects the contributions of each data in the group, and are sensitive to outliers.

The median is the value that falls in the middle position when the observations are ranked in order from the smallest to the largest. If the number of observations is odd, the median is the middle number. If it is even, the median is the average of the two middle numbers. Unlike the mean, the median is useful on skewed data, and can be used for ordinal or numerical data if skewed.

The mode is the value that occurs with the greatest frequency in a set of observations, and is utilized for bimodal distribution.

The variance and the standard deviation are not measures of central tendency, but of dispersion.

Number needed to harm are a measure of the impact of a treatment or intervention that is often used to communicate results to patients, clinicians, the public and policymakers. It states how many patients need to be treated for one additional patient to experience an adverse outcome (e.g. a death). It is calculated as the inverse of the absolute risk reduction. It can equally well be applied to harmful outcomes as well as beneficial ones, where it becomes numbers needed to treat (NNT) instead.

In this way, they are both calculated the same but NNT usually refers to a therapeutic treatment whereas NNH refers to a risk-factor for disease.

The normal distribution is a symmetrical, bell-shaped distribution in which the mean, median and mode are all equal.

Standard error can be calculated by the following formula:
Standard Error= (Standard Deviation)/√(Sample Size)
= (16) / √(100)
= 16 / 10
= 1.6

Case control studies in particular are prone to recall bias, people who are suffering from COPD might sometimes relate the ailment to marijuana usage in past and hence contrary to the control group, they are more able to describe to what extent they have been using the drug in the past.

As recommended, all the doctors should make sure that there practice is based on evidence and thus it is paramount that the doctors learn to appraise the paper in a critical manner i.e. ability to detect any potential source of bias.

Detection Bias: Outcomes are more looked for in one group than the other.

Observer Bias: Subjectivity of observers regarding the outcome.

Publication bias: Not publishing the results of a valid study just because they are negative or uninteresting can be termed as publication bias.

Recall bias: Recall bias is specifically appropriate to the case control studies that is when ever the memories retrieved by the participants differ in accuracy.

Response Bias: The participants that filled out the response forms containing information that was going to be used for a trial, don’t represent the target population.

Number needed to treat (NNT) is a time specific epidemiological measure that indicates how many patients would be require for an intervention to prevent one additional bad outcome. A perfect NNT would be 1, where everyone improves with treatment, thus the higher the NNT, the less effective the treatment.

Thus if you treat 1000 patients then you will expect to have 50 fewer strokes.

The null hypothesis states that there is no significant difference between two groups.

The alternative hypothesis states that there is a significant difference between two groups.

A type I error (false positive) occurs when a null hypothesis is rejected when it should be accepted.

A type II error (false negative) occurs when the alternative hypothesis is rejected when it should be accepted.

The probability determines the rejection of a null hypothesis.

The level of significance is set at p <0.05.

A ‘double blind crossover study’ happens when every patient receive both treatments.

It is incorrect to say that only half of the patients do not know which treatment they receive because in a double blind placebo control clinical trial ALL of the patients are blind to their treatment choice .

If some of the patients are not treated, they would be aware that they were not being treated and it could not be considered a blind trial.

In a double blind placebo control clinical trial both the clinician and the patient are blind to the treatment choice. The clinician assessing the effects of the treatment, therefore, does not know which treatment the patient has been given.

Boyle’s law is correctly stated as it states that the volume of a gas of known mass is inversely proportional with absolute pressure, at a constant temperature.

Beer’s law states that radiation absorption by a solution of known thickness and concentration is identical to that of a solution of double thickness and half concentration.

Bougner’s (or Lambert’s) law states that every layer with the same thickness will absorb the same amount of radiation as it passes through.

Graham’s law states that the diffusion rate of a gas is inversely related to the square root of its molecular weight.

Raoult’s law states that the reduction of a solvent’s vapour pressure is directly proportional to the solute’s molar concentration.

The attributable risk is the rate of a disease in an exposed group to that of a group that has not been exposed to it. It involves the measure of association that is pertinent to making decisions for the individuals.

When the association among any two classes of object is defined by the presence of a third entity it is termed as indirect association. For an instance, the age of the employee may affect the rate of pay, which would have implications on job satisfaction. So, in this example, an indirect relationship between age and job satisfaction exists due to a third party i.e. rate of pay.

Since the data is normally distributed, 95.4% of the values lie with in 2 standard deviations from mean. The rest of the 4.6% are distributed symmetrically outside of that range which means 2.3% of the values lie above 2 standard deviations of the mean.

Number needed to treat can be defined as the number of patients who need to be treated to prevent one additional bad outcome.

It can be found as:

NNT=1/Absolute Risk Reduction (rounded to the next integer since number of patients can be integer only).

where ARR= (Risk factor associated with the new drug group) — (Risk factor associated with the currently available drug)

So,

ARR= (0.04-0.03)

ARR= 0.01

NNT= 1/0.01

NNT=100

Phase 0 trials assist the scientists in studying the behaviour of drugs in humans by micro dosing patients. They are used to speed up the developmental process. They have no measurable therapeutic effect and efficiency.

Phase 1 is associated with assessing whether a drug is safe to use or not. The process is extensive and can take up to several months. It also involves healthy participants (less than 100) that are paid to take part in the study. The side effects upon increasing dosage are also addressed by the study. The effects the drug has on humans including how its absorbed, metabolized and excreted are studied. Approximately 70% of the drugs pass this phase.

Phase 2 trials involve patients that are suffering from the disease under study and are associated with determining the efficiency and the optimum dosage of the drug.

Phase 3 also assesses the efficacy but at a higher scale with larger population sample.

Phase 4 trials are involved with the long term effects and side effects of the drug.

Randomisation allows for performance of experimental trials in a random order. Using this method gives us control over the confounding variables that are not supposed to be held constant.

For an instance, by employing randomisation we get to control biological differences among individual human beings during experimental trials.

Hawthorne effect explains the change in any behavioural aspect owing to the awareness that the person is being observed.
Simpson’s Paradox explains the association developed when the data from several groups is combined to form a single larger group.

The remaining terms are made up.

68% of the population will be found in one standard deviation (SD) above plus one SD below the mean. Two SDs above plus two SDs below the mean will include 95% of the population.

The median can be greater or less than the mean as it is simply the mid point of the data after the data is arranged. Half the data are above and half below the median .

The mode is a true score, unlike the mean or the median. It is the most common score or the score obtained from the largest number of subjects in any given data.

The study is being conducted on a smaller level with only 200 participants and is determining the effectiveness of the drug in comparison to a placebo. These characteristics are in accordance with the second phase of trial.

Half life (T½) is the time required to change the amount of drug in the body by one-half (or 50%) during elimination. The time course of a drug in the body will depend on both the volume of distribution and the clearance.

Extrapolating the values from the plasma concentration vs time:

Plasma concentration at 0 hours = 800 mcg/mL
Plasma concentration at 2 hours = 400 mcg/mL
Plasma concentration at 4 hours = 200 mcg/mL
Plasma concentration at 6 hours = 100 mcg/mL
Plasma concentration at 8 hours = 50 mcg/mL
Plasma concentration at 10 hours = 25 mcg/mL
Plasma concentration at 12 hours = 12.5 mcg/mL
Plasma concentration at 14 hours = 6.25 mcg/mL

Also known as the “product limit estimate’’, the Kaplan-Meier survival plot is used to estimate the true survival function from the collected data.

Using this plot, probabilities of occurrence of an event at a certain point in time can be computed. The successive probabilities are multiplied by any earlier computed probabilities to get the final estimate. For a given population, the survival probability at any particular time on the plot = (number of subjects living at the start – number of subjects who died)/number of subjects living at the start.

The description of a scatter plot is a graphical representation using Cartesian coordinates to display values for more than two variables for data set. It is used for to assess the relationship between 2 different variables.

The incidence is the number of new cases per population in a given time period whereas prevalence is the total number of cases per population at a particular point in time.

For chronic diseases, prevalence is used rather than incidence. Prevalence differs from incidence proportion as prevalence includes all cases (new and pre-existing cases) in the population at the specified time whereas incidence is limited to new cases only. In acute diseases the prevalence and incidence are similar. For conditions such as the common cold the incidence may be greater than the prevalence

Prevalence is usually greater than the incidence rate for a chronic disease as prevalence includes all cases (new and pre-existing cases) in the population at a specified time whereas incidence is only limited to new cases.

Prevalence = incidence * duration of condition

The Weibull distribution are used to describe various types of observed failures of the components. it is used in reliability and survival analysis.

Regression Analysis is used to measure the relationship between among two or more variable. It determines the effect of independent variables on the dependent variables.

Student t-test is one of the most commonly used method to test the hypothesis. It determines the significant difference between the means of two different groups.

A time series is a collection of observations of well-defined data obtained at regular interval of time.

Kaplan-Meier estimator is used to estimate the survival function from lifetime data. It can be derived from maximum likelihood estimation of hazard function. It is most likely used to measure the fraction of patient’s life for a certain amount of time after treatment.

The incidence of a disease is the number of new cases of the disease in a population over a defined time period.

The prevalence of a disease is the number of cases of the disease in a population over a defined time period describes. It is NOT the number of new cases.

The number of new cases of a disease only, has no denominator (time period or population) from which to derive an incidence.

The number of new cases of a disease seeking medical treatment is the incidence of patients seeking medical treatment NOT the incidence of the disease in a population.

The death rate from a disease is the number of patients dying from the disease in a population.

In statistical terms, correlation is used to denote association between two quantitative variables.

The degree of association is measured by a correlation coefficient, denoted by r. The correlation coefficient is measured on a scale that varies from + 1 through 0 to – 1. Complete correlation between two variables is expressed by either + 1 or -1. When one variable increases as the other increases the correlation is positive; when one decreases as the other increases it is negative. Complete absence of correlation is represented by 0.

The two methods are not synonymous as correlation measures the degree of relationship between two variables whereas regression analysis is about how one variable affects another or what changes it has on the other variable. Both are also shown by a different graphical representation.

Hypochondriasis is an illness anxiety disorder, and describes excessively worriedness about the presence of a disease. While the woman is concerned about her possibility of developing motor neurone disease, she understands that no symptoms have yet appeared. Hypochondriasis involves patients who refuse to accept that they don’t have the disease, even if the results come back negative.

Late Look Bias occurs when the data is gathered or analysed at an inappropriate time e.g. when many of the subjects suffering from a fatal disease have died. This type of biasness might occur in some retrospective studies of motor neurone disease, but is not applicable to this prospective study.

In procedure bias, the researcher decides assignment of a treatment versus control and assigns particular patients to one group or the other non-randomly. This is unlikely to have occurred in this case, although it is not mentioned specifically. Of all the options, lead time-bias is a better answer.

The Hawthorne Effect refers to groups modifying their behaviour simply because they are aware of being observed. Any differences in the behaviour have not been mentioned in the question, and it is highly unlikely that a change in patient’s behaviour would have affected their length of survival in this case.

The correct option is lead-time bias. Even if the new blood test diagnoses the disease earlier, it doesn’t affect the outcome, as the survival time was still on average 43 months from the onset of symptoms in both groups. With the help of blood test, the disease was only detected 8 months earlier.

The standard error of the mean (SEM) is a measure of the spread expected for the mean of the observations – i.e. how ‘accurate’ the calculated sample mean is from the true population mean. The relationship between the standard error of the mean and the standard deviation is such that, for a given sample size, the standard error of the mean equals the standard deviation divided by the square root of the sample size.

SEM = SD / square root (n)

where SD = standard deviation and n = sample size

Number needed to treat can be defined as the number of patients who need to be treated to prevent one additional bad outcome.

It can be found as:

NNT=1/Absolute Risk Reduction (rounded to the next integer since number of patients can be integer only).

where ARR= (Risk factor associated with the new drug group) — (Risk factor associated with the currently available drug)

So,

ARR= (165/1050)-(132/1044)

ARR= (0.157-0.126)

ARR= 0.031

NNT= 1/0.031

NNT=32.3