Since the gas is less dense at higher altitudes, the density of a gas influences flows when passing through the orifice. Due to this reason, for a given flow rate, the bobbin will not be forced as far up the rotameter tube.

At higher altitudes, the volume of a fixed mass of gas increases, and therefore the molecules of gas are widely spaced resulting in a decrease in density with an increase in altitude.

Viscosity is simply termed as friction of gas. The viscosity of a gas is important only at low flow rates when the flow characteristic of the gas is laminar.

Charle’s law stated that the volume occupied by a fixed amount of gas is directly proportional to its absolute temperature (T) provided the pressure remains constant.

Boyle’s law for a fixed amount of gas at constant temperature, the pressure (P) and volume (V) are inversely proportional.

The following units are derived SI units of measurement.

Energy or work: kg.m2.s-2
The Joule (J) is the energy transferred to an object when a force of one newton acts on that object in the direction of its motion through a distance of one meter or N.m.

Power: kg.m2.s-3
The Watt (W) = rate of transfer of energy or Joule per second J/s.

Force: kg.m.s-2
One Newton (N) which is the international unit of measure for force = 1 kilogram meter per second squared. 1 Newton of force is the force required to accelerate an object with a mass of 1 kilogram 1 meter per second per second.

Volt: kg.m2.s-3.A-1
The volt (V) is defined as the potential difference across a conductor when a current of one ampere dissipates one watt of power or W/A.

Pressure: kg.m-1.s-2
A pascal (Pa) is force per unit area or N/m2.

The formula for calculating air: oxygen entrainment ratio is given as :
100% − FiO2 = air/oxygen entrainment ratio
Since FiO2 − 21% and the entrainment ratio is already known. Substituting the values in the equation: x = FiO2.

100 − x = 9
x − 21
100 − x = 9(x − 21)
100 − x = 9x − 189
10x = 289
x = 289/10
x = 28.9%

pH is the negative log to the base 10 of hydrogen ion concentration:

So, what power produces the answer?

pH = – log10 [H+]

Making [H+] the subject:

[H+] = 10-pH

Substituting, [H+] = 10-7

One nanomole = 1 x 10-9 or 0.000000001

10-7 = 1x 0.0000001 or 10 x 0.00000001 or 100 x 0.000000001

100 nanomole

The total body water content of a 70kg man is (70 × 0.6) = 42 litres. For a woman, the calculation is (70 × 0.55) = 38.5 litres.

For a man, it is subdivided into:

Extracellular fluid (ECF) = 14L (1/3)
Intracellular fluid (ICF) = 28L (2/3).

The ECF volume is further divided into:

Interstitial fluid = 10.5 litres
Plasma = 3 litres
Transcellular fluid (CSF/synovial fluid) = 0.5 litres.

Directly measured fluid compartments:

Heavy water (deuterium) can be used to measure total body water content, which is freely distributed.
Albumin labelled with a radioactive isotope or using a dye called Evans blue can be used to measure Plasma volume . They do not diffuse into red blood cells.
Radiolabelled (Cr-51) red blood cells can be used to measure total erythrocyte volume.
Inulin as the tracer can be used to measure ECF volume as it circulate freely in the interstitial and plasma volumes.

Indirectly measured fluid compartments:

Total blood volume can be calculated with the level of haematocrit and the volume of total circulating red blood cells.
ICF volume can be calculated by subtracting ECF volume from total blood volume.

The solid state of matter has a definite volume and shape and particles are packed closely together and are incompressible. Within this tight lattice, there is enough thermal energy to produce vibration of particles.

Liquids however have a volume but no definite shape. These particles are less tightly packed together. Although there is free movement within the volume, they are incompressible.

Gases, however, have no finite shape or volume and particles are free to move rapidly in a state of random motion. They are compressible and are completely shaped by the space in which they are held. Vapours exist as a gas phase in equilibrium with identical liquid or solid matter below its boiling point.

The most prevalent state of matter in the universe is plasma which is formed by heating atoms to very high temperatures to form ions.

In the Child-Pugh classification system, the following 5 components are determined or calculated in order:

Ascites

Grade of encephalopathy

Serum bilirubin (?mol/L)

Serum Albumin (g/L)

Prothrombin time or INR

Raised liver enzymes are not the component of the classification system.

The starling forces operate to maintain a homeostatic flow across the pulmonary capillary bed.

The outward driving force comprises of the capillary hydrostatic pressure (13 mmHg), negative interstitial fluid pressure (zero to slightly negative), and interstitial colloid osmotic pressure (17 mmHg). The inward driving force is controlled by the plasma colloid osmotic pressure (25 mmHg).

Charles’ Law states that there is a direct correlation between temperature and volume, where pressure and amount gas are constant. As temperature increases, volume also increases.

Boyle’s Law states that Pressure is inversely proportional to volume, assuming that temperature and amount of gas are constant. As volume increases, pressure decreases. In Dalton’s law of partial pressure, the total pressure exerted by a mixture of gases is equal to the sum of the partial pressure of the gases in mixture.

According to Henry’s Law for concentration of dissolved gases, at a constant temperature, the amount of a given gas that dissolves in a given type and volume of liquid is directly proportional to the partial pressure of that gas in equilibrium with that liquid. An equivalent way of stating the law is that the solubility of a gas in a liquid is directly proportional to the partial pressure of the gas above the liquid.

Gay-Lussac’s Law states that the pressure of a given mass of gas varies directly with the absolute temperature of the gas, when the volume is kept constant. This law is very similar to Charles’ Law, with the only difference being the type of container. Whereas the container in a Charles’ Law experiment is flexible, it is rigid in a Gay-Lussac’s Law experiment.