Local currents propagate action potentials down the axons of neurons. This local current flow following depolarisation results in the depolarisation of the neighbouring axonal membrane, and when this region approaches the threshold, more action potentials are generated and so forth. Due to the refractory period, portions of the membrane that have recently depolarized will not depolarize again, resulting in the action potential only being able to go in one direction.

The square root of axonal diameter determines the velocity of the action potential; the axons with the biggest diameter have the quickest conduction velocities. When a neuron is myelinated, the speed of the action potential rises as well.
The myelin sheath is an insulating coating that surrounds certain neural axons. By increasing membrane resistance and decreasing membrane capacitance, the myelin sheath improves conduction. This enables faster electrical signal transmission via a neuron, making them more energy-efficient than non-myelinated neuronal axons.
Electrical impulses are quickly transmitted from one node to the next, causing depolarization of the membrane above the threshold and triggering another action potential, which is then transmitted to the next node. An action potential is rapidly conducted down a neuron in this manner. Saltatory conduction is the term for this.
Multiple sclerosis is an example of a clinical disorder in which the myelin sheath is affected. It is an immune-mediated disorder in which certain nerve cells in the brain and spinal cord become demyelinated. The ability of some areas of the nervous system to properly transmit action potentials is disrupted by demyelination, resulting in a variety of neurological symptoms and indications.

Local currents propagate action potentials down the axons of neurons. Following depolarization, this local current flow depolarizes the next axonal membrane, and when this region crosses the threshold, more action potentials are formed, and so on. Due to the refractory period, portions of the membrane that have recently depolarized will not depolarize again, resulting in the action potential only being able to go in one direction.

The square root of axonal diameter determines the velocity of the action potential; the axons with the biggest diameter have the quickest conduction velocities. When a neuron is myelinated, the speed of the action potential rises as well.

The myelin sheath is an insulating coating that surrounds certain neural axons. By increasing membrane resistance and decreasing membrane capacitance, the myelin coating increases conduction. This enables faster electrical signal transmission via a neuron, making them more energy-efficient than non-myelinated neuronal axons.

Nodes of Ranvier are periodic holes in a myelinate axon when there is no myelin and the axonal membrane is exposed. There are no gated ion channels in the portion of the axon covered by the myelin sheath, but there is a high density of ion channels in the Nodes of Ranvier. Action potentials can only arise at the nodes as a result of this.
Electrical impulses are quickly transmitted from one node to the next, causing depolarization of the membrane above the threshold and triggering another action potential, which is then transmitted to the next node. An action potential is rapidly conducted down a neuron in this manner. Saltatory conduction is the term for this.

Electrolytes are compounds that may conduct an electrical current and dissociate in solution. Extracellular and intracellular fluids contain these chemicals. The predominant cation in extracellular fluid is sodium, whereas the major anion is chloride. Potassium is the most abundant cation in the intracellular fluid, while phosphate is the most abundant anion. These electrolytes are necessary for homeostasis to be maintained.

Osmosis is the passive movement of water across a semipermeable membrane from a region of low solute concentration to a region of higher solute concentration.
When hypertonic fluid is ingested:
The plasma becomes CONCENTRATED.

The cells lose water and shrink
The intracellular fluid becomes more concentrated.
Water and ions move freely from the plasma into the interstitial fluid and the interstitial fluid becomes more concentrated.
The increased osmotic potential draws water out of the cells.

Cardiac myocytes contract by excitation-contraction coupling, just like skeletal myocytes. Heart myocytes, on the other hand, utilise a calcium-induced calcium release mechanism that is unique to cardiac muscle (CICR). The influx of calcium ions (Ca2+) into the cell causes a ‘calcium spark,’ which causes more ions to be released into the cytoplasm.

An influx of sodium ions induces an initial depolarisation, much as it does in skeletal muscle; however, in cardiac muscle, the inflow of Ca2+ sustains the depolarisation, allowing it to remain longer. Due to potassium ion (K+) inflow, CICR causes a plateau phase in which the cells remain depolarized for a short time before repolarizing. Skeletal muscle, on the other hand, repolarizes almost instantly.

The release of Ca2+ from the sarcoplasmic reticulum is required for calcium-induced calcium release (CICR). This is mostly accomplished by ryanodine receptors (RyR) on the sarcoplasmic reticulum membrane; Ca2+ binds to RyR, causing additional Ca2+ to be released.

Osmolality and osmolarity are measurements of the solute concentration of a solution. Although the two terms are often used interchangeably, there are differences in the definitions, how they are calculated and the units of measurement used.

Osmolarity, expressed as mmol/L, is an estimation of the osmolar concentration of plasma. It is proportional to the number of particles per litre of solution.
Measured Na+, K+, urea and glucose concentrations are used to calculate the value indirectly.
It is unreliable in pseudohyponatremia and hyperproteinaemia.

The equations used to calculate osmolarity are:
Osmolarity = 2 (Na+) + 2 (K+) + Glucose + Urea (all in mmol/L)
OR
Osmolarity = 2 (Na+) + Glucose + Urea (all in mmol/L)

Doubling of sodium accounts for the negative ions associated with sodium, and the exclusion of potassium approximately allows for the incomplete dissociation of sodium chloride.

The mitochondria is responsible for the production of the cell’s supply of chemical energy. It does this by using molecular oxygen, sugar and small fatty acid molecules to generate adenosine triphosphate (ATP) by a process ss known as oxidative phosphorylation. An enzyme called ATP synthase is required.

Transcription of ribosomal RNA occurs in the nucleolus

Production of messenger RNA occur in the nucleus

Production of lysosome occurs in the Golgi apparatus

The post-translational processing of newly made proteins occurs in the endoplasmic reticulum

Myofibrils, which are around 1 m in diameter, make up each myofiber. The cytoplasm separates them and arranges them in a parallel pattern along the cell’s long axis. These myofibrils are made up of actin and myosin filaments that are repeated in sarcomeres, which are the myofiber’s basic functional units.

Myofilaments are the filaments that make up myofibrils, and they’re made mostly of proteins. Myofilaments are divided into three categories:

Myosin filaments are thick filaments made up mostly of the protein myosin.
Actin filaments are thin filaments made up mostly of the protein actin.
Elastic filaments are mostly made up of the protein titin.
The sarcomere is a Z-line segment that connects two adjacent Z-lines.
The I-bands are thin filament zones that run from either side of the Z-lines to the thick filament’s beginning.
Between the I-bands is the A-band, which spans the length of a single thick filament.
The H-zone is a zone of thick filaments that is not overlaid by thin filaments in the sarcomere’s centre. The H-zone keeps the myosin filaments in place by surrounding them with six actin filaments each.
The M-band (or M-line) is a disc of cross-connecting cytoskeleton elements in the centre of the H-zone.
The thick filament is primarily made up of myosin. The thin filament is primarily made up of actin. Actin, tropomyosin, and troponin are found in a 7:1:1 ratio in thin filaments.

There are three types of muscle:
Skeletal muscle
Cardiac muscle
Smooth muscle

Individual muscle is enveloped in a layer of dense irregular connective tissue called the epimysium. The epimysium protects the muscles from friction against bones and other muscles.

Skeletal muscle is composed of muscle fibres, referred to as myofibers which is ensheathed by a wispy layer of areolar connective tissue called the endomysium. The endomysium is the smallest and deepest component of muscle connective tissue.

Myofibers grouped together in bundles form fascicles, or fasciculi. These are surrounded by a type of connective tissue called the perimysium.

Beneath the endomysium lies the sarcolemma, an elastic sheath with infoldings that invaginate the interior of the myofibers, particularly at the motor endplate of the neuromuscular junction.

A refractory period follows each action potential. The absolute refractory time and the relative refractory period are two divisions of refractory periods. Because the sodium channels seal after an AP, they enter an inactive state during which they cannot be reopened regardless of membrane potential, this time occurs.

The sodium channels slowly come out of inactivation during the relative refractory period that follows. During this time, a stronger stimulus than that required to initiate an action potential can excite the cell. The strength of the stimulus required early in the relative refractory period is relatively high, and it steadily decreases as more sodium channels recover from the inactivation of the refractory period.

Nodes of Ranvier are periodic holes in a myelinate axon when there is no myelin and the axonal membrane is exposed. There are no gated ion channels in the portion of the axon covered by the myelin sheath, but there is a high density of ion channels in the Nodes of Ranvier. Action potentials can only occur at the nodes as a result of this.