Trauma patients who require a definitively secured airway include those who are apnoeic, have a Glasgow Coma Scale score of less than 9, experience sustained seizure activity, have unstable midface trauma or airway injuries, have a large flail segment or respiratory failure, have a high risk of aspiration, or are unable to maintain an airway or oxygenation through other means.

To predict difficult intubations, the LEMON assessment can be utilized. The LEMON mnemonic provides a systematic approach to assess potential challenges in intubation. It stands for the following:

– Look externally: Examine for any characteristics that are known to cause difficult intubation or ventilation.
– Evaluate the 3-3-2 rule: Measure the incisor distance, hyoid/mental distance, and thyroid-to-mouth distance. If any of these measurements are less than the specified number of fingerbreadths, it may indicate a difficult intubation.
– Mallampati: Assess the Mallampati score, which is a classification system based on the visibility of certain structures in the mouth and throat. A score of 3 or higher suggests a difficult intubation.
– Obstruction: Check for the presence of any conditions that could potentially obstruct the airway.
– Neck mobility: Evaluate the mobility of the patient’s neck, as limited mobility may make intubation more challenging.

By utilizing the LEMON assessment, healthcare providers can identify potential difficulties in securing the airway and make appropriate interventions to ensure patient safety.

Adrenaline acts on all types of adrenergic receptors without preference. It is administered in doses of 1 mg every 3-5 minutes during cardiac arrest. On the other hand, Amiodarone functions by blocking voltage-gated potassium channels and is typically administered after the third shock.

Further Reading:

In the management of respiratory and cardiac arrest, several drugs are commonly used to help restore normal function and improve outcomes. Adrenaline is a non-selective agonist of adrenergic receptors and is administered intravenously at a dose of 1 mg every 3-5 minutes. It works by causing vasoconstriction, increasing systemic vascular resistance (SVR), and improving cardiac output by increasing the force of heart contraction. Adrenaline also has bronchodilatory effects.

Amiodarone is another drug used in cardiac arrest situations. It blocks voltage-gated potassium channels, which prolongs repolarization and reduces myocardial excitability. The initial dose of amiodarone is 300 mg intravenously after 3 shocks, followed by a dose of 150 mg after 5 shocks.

Lidocaine is an alternative to amiodarone in cardiac arrest situations. It works by blocking sodium channels and decreasing heart rate. The recommended dose is 1 mg/kg by slow intravenous injection, with a repeat half of the initial dose after 5 minutes. The maximum total dose of lidocaine is 3 mg/kg.

Magnesium sulfate is used to reverse myocardial hyperexcitability associated with hypomagnesemia. It is administered intravenously at a dose of 2 g over 10-15 minutes. An additional dose may be given if necessary, but the maximum total dose should not exceed 3 g.

Atropine is an antagonist of muscarinic acetylcholine receptors and is used to counteract the slowing of heart rate caused by the parasympathetic nervous system. It is administered intravenously at a dose of 500 mcg every 3-5 minutes, with a maximum dose of 3 mg.

Naloxone is a competitive antagonist for opioid receptors and is used in cases of respiratory arrest caused by opioid overdose. It has a short duration of action, so careful monitoring is necessary. The initial dose of naloxone is 400 micrograms, followed by 800 mcg after 1 minute. The dose can be gradually escalated up to 2 mg per dose if there is no response to the preceding dose.

It is important for healthcare professionals to have knowledge of the pharmacology and dosing schedules of these drugs in order to effectively manage respiratory and cardiac arrest situations.

The finger has a total of four digital nerves. Two of these nerves, known as the palmar digital nerves, run along the palm side of each finger. The other two nerves, called the dorsal digital nerves, are located on the back side of the finger. However, the dorsal nerve supply changes slightly at the level of the proximal IP joint. Beyond this point, the dorsal nerve supply comes from the dorsal branch of the palmar digital nerve.

Further Reading:

Digital nerve blocks are commonly used to numb the finger for various procedures such as foreign body removal, dislocation reduction, and suturing. Sensation to the finger is primarily provided by the proper digital nerves, which arise from the common digital nerve. Each common digital nerve divides into two proper digital nerves, which run along the palmar aspect of the finger. These proper digital nerves give off a dorsal branch that supplies the dorsal aspect of the finger.

The most common technique for digital nerve blocks is the digital (ring) block. The hand is cleaned and the injection sites are cleansed with an alcohol swab. A syringe containing 1% lidocaine is prepared, and the needle is inserted at the base of the finger from a dorsal approach. Lidocaine is infiltrated under the skin, and the needle is then advanced towards the palmar aspect of the finger to inject more lidocaine. This process is repeated on the opposite side of the finger.

It is important not to use lidocaine with adrenaline for this procedure, as it may cause constriction and ischemia of the digital artery. Lidocaine 1% is the preferred local anesthetic, and the maximum dose is 3 ml/kg up to 200 mg. Contraindications for digital nerve blocks include compromised circulation to the finger, infection at the planned injection site, contraindication to local anesthetic (e.g. allergy), and suspected compartment syndrome (which is rare in the finger).

Complications of digital nerve blocks can include vascular injury to the digital artery or vein, injury to the digital nerve, infection, pain, allergic reaction, intravascular injection (which can be avoided by aspirating prior to injection), and systemic local anesthetic toxicity (which is uncommon with typical doses of lidocaine).

Suxamethonium, also called succinylcholine, is currently the sole depolarising neuromuscular blocking drug used in clinical settings. It functions by binding to acetylcholine (Ach) receptors as an agonist. Unlike acetylcholine, it is not broken down by acetylcholinesterase, leading to a longer duration of binding and prolonged inhibition of neuromuscular transmission. Eventually, it is metabolized by plasma cholinesterase (pseudocholinesterase).

Further Reading:

Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.

Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.

Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.

Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.

Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.

To prevent the aspiration of gastric contents, it is recommended to apply a force of 30-40 Newtons to the cricoid cartilage during cricoid pressure.

Further Reading:

Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.

Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.

Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.

Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.

Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.

Prilocaine is the preferred choice for intravenous regional anesthesia. This is because Bupivacaine and lidocaine have a higher risk of causing harmful side effects.

Further Reading:

Bier’s block is a regional intravenous anesthesia technique commonly used for minor surgical procedures of the forearm or for reducing distal radius fractures in the emergency department (ED). It is recommended by NICE as the preferred anesthesia block for adults requiring manipulation of distal forearm fractures in the ED.

Before performing the procedure, a pre-procedure checklist should be completed, including obtaining consent, recording the patient’s weight, ensuring the resuscitative equipment is available, and monitoring the patient’s vital signs throughout the procedure. The air cylinder should be checked if not using an electronic machine, and the cuff should be checked for leaks.

During the procedure, a double cuff tourniquet is placed on the upper arm, and the arm is elevated to exsanguinate the limb. The proximal cuff is inflated to a pressure 100 mmHg above the systolic blood pressure, up to a maximum of 300 mmHg. The time of inflation and pressure should be recorded, and the absence of the radial pulse should be confirmed. 0.5% plain prilocaine is then injected slowly, and the time of injection is recorded. The patient should be warned about the potential cold/hot sensation and mottled appearance of the arm. After injection, the cannula is removed and pressure is applied to the venipuncture site to prevent bleeding. After approximately 10 minutes, the patient should have anesthesia and should not feel pain during manipulation. If anesthesia is successful, the manipulation can be performed, and a plaster can be applied by a second staff member. A check x-ray should be obtained with the arm lowered onto a pillow. The tourniquet should be monitored at all times, and the cuff should be inflated for a minimum of 20 minutes and a maximum of 45 minutes. If rotation of the cuff is required, it should be done after the manipulation and plaster application. After the post-reduction x-ray is satisfactory, the cuff can be deflated while observing the patient and monitors. Limb circulation should be checked prior to discharge, and appropriate follow-up and analgesia should be arranged.

There are several contraindications to performing Bier’s block, including allergy to local anesthetic, hypertension over 200 mm Hg, infection in the limb, lymphedema, methemoglobinemia, morbid obesity, peripheral vascular disease, procedures needed in both arms, Raynaud’s phenomenon, scleroderma, severe hypertension and sickle cell disease.

Early signs of local anaesthetic systemic toxicity (LAST) can include numbness around the mouth and tongue, a metallic taste in the mouth, feeling lightheaded or dizzy, and experiencing visual and auditory disturbances. LAST is a rare but serious complication that can occur when administering anesthesia. It is important for healthcare providers to be aware of the signs and symptoms of LAST, as early recognition can lead to better outcomes. Additionally, hyperventilation can temporarily lower calcium levels, which can cause numbness around the mouth.

Further Reading:

Local anaesthetics, such as lidocaine, bupivacaine, and prilocaine, are commonly used in the emergency department for topical or local infiltration to establish a field block. Lidocaine is often the first choice for field block prior to central line insertion. These anaesthetics work by blocking sodium channels, preventing the propagation of action potentials.

However, local anaesthetics can enter the systemic circulation and cause toxic side effects if administered in high doses. Clinicians must be aware of the signs and symptoms of local anaesthetic systemic toxicity (LAST) and know how to respond. Early signs of LAST include numbness around the mouth or tongue, metallic taste, dizziness, visual and auditory disturbances, disorientation, and drowsiness. If not addressed, LAST can progress to more severe symptoms such as seizures, coma, respiratory depression, and cardiovascular dysfunction.

The management of LAST is largely supportive. Immediate steps include stopping the administration of local anaesthetic, calling for help, providing 100% oxygen and securing the airway, establishing IV access, and controlling seizures with benzodiazepines or other medications. Cardiovascular status should be continuously assessed, and conventional therapies may be used to treat hypotension or arrhythmias. Intravenous lipid emulsion (intralipid) may also be considered as a treatment option.

If the patient goes into cardiac arrest, CPR should be initiated following ALS arrest algorithms, but lidocaine should not be used as an anti-arrhythmic therapy. Prolonged resuscitation may be necessary, and intravenous lipid emulsion should be administered. After the acute episode, the patient should be transferred to a clinical area with appropriate equipment and staff for further monitoring and care.

It is important to report cases of local anaesthetic toxicity to the appropriate authorities. Additionally, regular clinical review should be conducted to exclude pancreatitis, as intravenous lipid emulsion can interfere with amylase or lipase assays.

In cases of cardiac arrest, it is recommended to administer 1 mg of adrenaline intravenously (IV) every 3-5 minutes. According to the 2021 resus council guidelines for adult advanced life support (ALS), the administration of vasopressors should follow these guidelines:
– For adult patients in cardiac arrest with a non-shockable rhythm, administer 1 mg of adrenaline IV (or intraosseous) as soon as possible.
– For adult patients in cardiac arrest with a shockable rhythm, administer 1 mg of adrenaline IV (or intraosseous) after the third shock.
– Continuously repeat the administration of 1 mg of adrenaline IV (or intraosseous) every 3-5 minutes throughout the ALS procedure.

Further Reading:

In the management of respiratory and cardiac arrest, several drugs are commonly used to help restore normal function and improve outcomes. Adrenaline is a non-selective agonist of adrenergic receptors and is administered intravenously at a dose of 1 mg every 3-5 minutes. It works by causing vasoconstriction, increasing systemic vascular resistance (SVR), and improving cardiac output by increasing the force of heart contraction. Adrenaline also has bronchodilatory effects.

Amiodarone is another drug used in cardiac arrest situations. It blocks voltage-gated potassium channels, which prolongs repolarization and reduces myocardial excitability. The initial dose of amiodarone is 300 mg intravenously after 3 shocks, followed by a dose of 150 mg after 5 shocks.

Lidocaine is an alternative to amiodarone in cardiac arrest situations. It works by blocking sodium channels and decreasing heart rate. The recommended dose is 1 mg/kg by slow intravenous injection, with a repeat half of the initial dose after 5 minutes. The maximum total dose of lidocaine is 3 mg/kg.

Magnesium sulfate is used to reverse myocardial hyperexcitability associated with hypomagnesemia. It is administered intravenously at a dose of 2 g over 10-15 minutes. An additional dose may be given if necessary, but the maximum total dose should not exceed 3 g.

Atropine is an antagonist of muscarinic acetylcholine receptors and is used to counteract the slowing of heart rate caused by the parasympathetic nervous system. It is administered intravenously at a dose of 500 mcg every 3-5 minutes, with a maximum dose of 3 mg.

Naloxone is a competitive antagonist for opioid receptors and is used in cases of respiratory arrest caused by opioid overdose. It has a short duration of action, so careful monitoring is necessary. The initial dose of naloxone is 400 micrograms, followed by 800 mcg after 1 minute. The dose can be gradually escalated up to 2 mg per dose if there is no response to the preceding dose.

It is important for healthcare professionals to have knowledge of the pharmacology and dosing schedules of these drugs in order to effectively manage respiratory and cardiac arrest situations.

Lidocaine is a medication that is available in a concentration of 10 mg per milliliter. The maximum recommended dose of lidocaine is 18 milliliters.

Further Reading:

Local anaesthetics, such as lidocaine, bupivacaine, and prilocaine, are commonly used in the emergency department for topical or local infiltration to establish a field block. Lidocaine is often the first choice for field block prior to central line insertion. These anaesthetics work by blocking sodium channels, preventing the propagation of action potentials.

However, local anaesthetics can enter the systemic circulation and cause toxic side effects if administered in high doses. Clinicians must be aware of the signs and symptoms of local anaesthetic systemic toxicity (LAST) and know how to respond. Early signs of LAST include numbness around the mouth or tongue, metallic taste, dizziness, visual and auditory disturbances, disorientation, and drowsiness. If not addressed, LAST can progress to more severe symptoms such as seizures, coma, respiratory depression, and cardiovascular dysfunction.

The management of LAST is largely supportive. Immediate steps include stopping the administration of local anaesthetic, calling for help, providing 100% oxygen and securing the airway, establishing IV access, and controlling seizures with benzodiazepines or other medications. Cardiovascular status should be continuously assessed, and conventional therapies may be used to treat hypotension or arrhythmias. Intravenous lipid emulsion (intralipid) may also be considered as a treatment option.

If the patient goes into cardiac arrest, CPR should be initiated following ALS arrest algorithms, but lidocaine should not be used as an anti-arrhythmic therapy. Prolonged resuscitation may be necessary, and intravenous lipid emulsion should be administered. After the acute episode, the patient should be transferred to a clinical area with appropriate equipment and staff for further monitoring and care.

It is important to report cases of local anaesthetic toxicity to the appropriate authorities. Additionally, regular clinical review should be conducted to exclude pancreatitis, as intravenous lipid emulsion can interfere with amylase or lipase assays.

The earliest and most frequent clinical indication of malignant hyperthermia is typically an increase in end tidal CO2. An unexplained elevation in end tidal CO2 is often the initial and most reliable sign of this condition.

Further Reading:

Malignant hyperthermia is a rare and life-threatening syndrome that can be triggered by certain medications in individuals who are genetically susceptible. The most common triggers are suxamethonium and inhalational anaesthetic agents. The syndrome is caused by the release of stored calcium ions from skeletal muscle cells, leading to uncontrolled muscle contraction and excessive heat production. This results in symptoms such as high fever, sweating, flushed skin, rapid heartbeat, and muscle rigidity. It can also lead to complications such as acute kidney injury, rhabdomyolysis, and metabolic acidosis. Treatment involves discontinuing the trigger medication, administering dantrolene to inhibit calcium release and promote muscle relaxation, and managing any associated complications such as hyperkalemia and acidosis. Referral to a malignant hyperthermia center for further investigation is also recommended.